The led downlight is a kind of fixture installed on the ceiling. The installation method of the dimmable led downlights is different, and the effect is different. The function of the downlight is to create a spacious atmosphere. The installation method of the downlight is also very important. Let's take a look at the installation distance of the recessed downlight and the precautions for the installation of the downlight.
The installation distance of the dimmable led downlights is related to the width of the bottom edge of the ceiling and the diameter of the downlight. Its distance is determined by the center from the wall. If the width of the edge is 30 cm, the center is 15 cm from the wall. If the width of the edge is 40 cm, its center should be 20 cm from the wall.
There are several specifications for led downlight kit. The most used in the family is 6-8 cm in diameter and 12-15 cm in height. Therefore, when making ceilings, the reserved space should not be less than 15 cm. Otherwise, the downlights cannot be installed.
There is no certain standard for the distance between the tilt downlights. It depends on the number of installations and the brightness of the light source, as well as the indoor space. It needs to be considered in many aspects. It is not necessary to have certain data to support, so it cannot be unified.
As one of the commercial lighting manufacturers, Vertex Lighting has a professional team with more than 18 years experience for downlights, which can provide the most suitable advice for you.
Firstly, before digging holes in the ceiling, the size of the ceiling led downlight should be carefully measured, and then drilled on the ceiling according to the measurement results. Care must be taken when drilling, if the size is too large or too small, it cannot be installed.
Secondly, if there is no reserved power cord in the ceiling, you need to connect the power cord first. If there is a reservation, it can be directly connected to the power cord of the downlight.
Thirdly, after the downlight is installed, the height and thickness are best balanced with the ceiling and adjusted by the wing nut of the fixed reed.
Finally, turn off the power before installation to ensure that the switch is closed to prevent electric shock. Do not touch the surface of the lamp after the lighting is on. This lamp should be avoided in the place where the heat source and hot steam and corrosive gas are installed, so as not to affect the life.
Through the above introduction, we can see that the downlight is a more practical type of luminaire, which is beautiful and saves space. Mastering the installation distance of the downlight and grasping the installation skills of the led downlights is very helpful for fully utilizing the effect of the led downlight.
After reading this blog, do you favor to study more about us? Please contact us for further information.