Workshop

1. Machining
The downlight parts machining workshop uses 10 PLC lathes to machine components for ceiling lights. These components include the inner ring, outer ring and grooves. With an entire NCNC process, one person controls only two devices, thus saving costs. In addition, there are 10 drilling machines to drill holes in each part.

 
140x140
 
140x140
140x140
140x140
140x140

2. Assembly of LED Lights
2.1 The LED downlight assembly workshop has more than 20 workers, all of whom are well trained before employment and have at least 5 years of experience in assembly. The assembly line reaches a monthly output of 35,000 to 40,000 LED downlights.

 
140x140
 
140x140
140x140

2.2 Sticking fireproof material.

140x140

2.3 Weling the light source with lead-free process.

2.6 Connecting the LED downlight to the drive, and testing the power in order to ensure 100% ilumination.
 
140x140
140x140
 
3. Assembly of Non-LED Downlights
3.1 The workshop for non-LED downlights covers an area of over 500 square meters and has more than 30 assembly
workers. The monthly production output here is about 200,000 pieces.

 
140x140
140x140

3.2 Fire rated cover rivets the stainless steel sheet, the holder and earth wire.
 
140x140
140x140

3.3 Installation of blinding posts and junction box.
 
140x140
140x140
 
140x140

3.4 Fix the screws of the internal wire pessing plate.

140x140

3.5 High-voltage test, tests according. to the testing standards of different types of lamps.

140x140

3.6 Intallation of spring

140x140

3.7 Testing the grounding resistor

140x140

3.8 Packaging of the tested lights